Edgerouter Local Domain Name

If you set the domain in the edgerouter config and are using the erl to provide dns and dhcp you can set the edgerouter to auto add local dns entries for any device. Set system domain name by typing set system domain name home local.

Crs 8 Slot In Production Back View Fabric And Msc Cards Redundant Dc Power Data Center Router Msc

Right not referring to itself.

Edgerouter local domain name. Mac s can cause issues as it will assume local is referring to itself. It needs to regularly check if the local certificate needs to be renewed and request a renewal if it s time. On top of that it needs to make sure that this record is updated every time the server s ip address changes.

Set service dhcp server use dnsmasq enable commit save test. This will allow the router to resolve the fqdns of hosts using just the shortnames. I didn t see anything about it in the wiki so i ll present my setup here.

Set system static host mapping host name uap pro ubnt local inet ip address set system static host mapping host name uap pro ubnt local alias uap pro. Set system domain name home lan. Next you need to set a local domain name as shown below.

You could maintain two separate a records like this. Dns short name lookup fails on ubiquiti edgerouter firmware v1 9 1 here s the simple fix success. It s easier to explain with an example.

By default dnsmasq will serve names defined in etc hosts to local clients. In this case the edgerouter s dns forwarding service is not consulted. We can also set the domain name on the edgerouter itself.

I use lan and it works great from any type of device. Local provide clients the edgerouter s ip address as the dns server. We can add entries using the.

One thing that annoyed me was the lack of local dns options in the dns forwarding configuration. Specify a different domain in the edgerouter. Set system domain name ubnt local.

Set a domain name for your dhcp servers by typing set service dhcp server shared network name management subnet 10 0 100 0 24 domain name home local. Either way i d stay away from local. This domain will later be used as a common name cn in the certificate.

The quickest way is to stick a domain name like local on the dhcp service. Then the host name you set on each device is how you access things. Obviously if there is no certificate.

At this point you may need a reboot you should be able to ping your devices by hostname as configured in the static mapping section above. A canonical name record is a special type of dns record that points one domain name to another. More of a workaround really only needed only until the next firmware release.

I would stay far away from the local namespace. For my lab with a local domain of lab local all i needed to do was the following fix. In this case the dns forwarding service is used and all client dns requests are forwarded.

If using a device such as cloudkey you can set a static host mapping by typing set service dhcp server shared network name. The latter method is advantageous because the edgerouter can cache the dns information for the clients.

Lokasi:

Share :